The Installation of Dryer Machine.
First, when the dryer is transported by the manufacturer to your laundry room, you must first have a routine check. You should check which type of the machine you have purchased and if there is damage in the transportation process, and if the machine can be used. You should immediately take photographs and contact with manufacturers if you find these problems.
Second, before installing the dryer, you should determine the installation location of the dryer. In terms of selection of the dryer installation location, you should take into account the transport corridors, raw material turnover, inflow, inlet and the location of the sewer. Henan Hongxing Mining Machinery reminders you that the dryer should be installed with the dehydration machine, dryer and other equipments together to reduce the distance between the device to prevent the inappropriate choice of the location causing the subsequent trouble.
Third, the dryer is a bulky laundry facility with heavy weight, so the machine should be installed on the solid foundation required to maintain the level at the same time to prevent the appropriate selection of the location and uneven from causing large vibration when the equipment is at work, which will affect the service life and the washing efficiency of the dryer.
Forth, you should refer to the instruction manual of the dryer and find the door of the electrical control cabinet of the industrial washing machine in accordance with the instructions. Access to 380V three-phase power line and the zero line according to the terminal mark. ( One point needs to be reminded. The the electricity consumption of the dryer must be 380V. It is strictly forbidden to access to low voltage or high voltage.)
Fifth, you should refer to the tag instruction of the body of the dryer to appropriately access to the water pipes and steam pipes. If there is no steam condition, the inlet port can be blocked. If you use the steam heating function, you should install the the pressure indicating device and safety device in a prominent place of the main steam pipe outside the machine.